HP probook 4530s, Quick Web and HP_tools partition issues

Here is a quick solution the problem of not being able to open quick web on ur laptop. Im writing this post especially because after hours of searching the web I couldnt find any specific solution to the issue at hand. therefore i did a little trouble shooting myself and got the solution therefore im sharing it here with everyone, hope its helps. there are three basic problems with the quickweb application installation:

1. it does not install if your missing HP_TOOLS partition drive in ur system.
2. It will not install if u have the partition but tried to create it urself, or if its not FAT32.
3. this i found on my own, there is a small zip file named 'init.gz' found in the quickweb folder created after intall in the hp_tools partition.

Now i shall elaborate on each of the problems causing issues with quick web described above.
1. if your using windows 7 64bit like myself then you are allowed only 4 primary partitions in your system. and if you try to create a 5th then windows disk management asks to convert the drive to DYNAMIC. DO NOT CONVERT the drive to dynamic that will stop windows from starting on your system. windows OS DOES NOT RUN ON DYNAMIC HARD DISKS. I made the mistake of converting it to dynamic and its was next to impossible to retrieve my old system back, without having to reformat my hard disk and install a fresh copy of Win7.
Solution: Instead of trying to create a 5th partition try to convert the existing 4th partition in to FAT32 by using the software EaseUS partition, can download it from the link below. its freeware which i used. 

http://download.cnet.com/EaseUS-Partition-Master-Home-Edition/3000-2248_4-10863346.html U can use this to convert your existing partition into a fat32 primary partition. in order to do this delete the existing partition you want to dedicate to Hp_tools partition. once u delete the partition you will lose all ur data on that particular partition therefore it is recommended tht you backup all ur data. Once u have deleted it u will notice that the disk wil show unallocated space.
see the picture below.

 

just apply the changes to the program and close. let the unallocated space stay like than dont convert it to FAT32 from thins program. 2.then next step instead of creating the fat32 primary partition urself.
Use the hp software like i did to let the HP software create the hp_tools partition itself from the unallocated space.
U can use the hp software HP bios update UEFI its file name when u download it is sp 51327. depending on which model you have the file name will be different, but the software name will be the same i.e.HP bios update UEFI. below is the link for the software for probook 4530s win7 64bit. 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5060880&prodNameId=5060882&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-91506-1

once u start the setup it will prompt you that no HP_TOOls partition is detected would u like to create one. choose YES. the program will automatically setup a partition named HP_TOOLS fat32 of only 5gb.
Now instead of keeping it 5 gb used the easeUS partition to merge the remaining unallocated space with this new partition.
3. ur half way there now all you have to do is install a fresh copy of quick web on ur system. once u have done this u will notice that in the HP_tools partition there is a folder named quickweb open it.In it you will find a winrar file named "init.gz" just extract the file in the same folder and ur done. hopefully u can shutdown your system. use the quickweb dedicated key to start the quickweb.
Also in my research i came across information regarding enabling the quickweb option in the bios setup and on windows aswell.
U have to enable Quickweb in the bios setup just follow the steps below:
To do that here are the steps for it...
Enable Quickweb in BIOS Power on the notebook and repeatedly press F10 to enter the BIOS setup utility.
 Use the right and left arrow keys to navigate to the System Configuration menu.
Use the up and down arrow keys to navigate to Boot Options, and then press the enter key.
Navigate to Quickweb and select Enabled. If desired, update the value for Delay to Boot Windows.
 Press F10 to save and exit

Enable QuickWeb in Windows environment(ONLY DO THIS IF UR QUICKWEB VERSION IS OLDER THAN 3.0 OTHERWISE SKIP THIS STEP)

In the Windows environment, click Start, All Programs, HP Quickweb, Quickweb Configuration Tool. Click on Status tab.
Select Enable Under Enable Quickweb to automatically launch upon computer start-up
If you choose to select Enable countdown timer, set the timer to at least 15 seconds to allow enough time to use QuickWeb before Windows automatically loads.


another helpful site with information.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Re-install-Quickweb/td-p/323129

Its been a long time since I last listened to the voice in my head... now don't get me wrong I'm not insane well at least not yet ;) I had replaced this voice with real people. but over time it has occurred to me that, while others help you connect and expand your knowledge they do not lend you the time to reflect. you are to consumed with the thought of other people that you lose yourself on the way. Its been a long time since was in a mood to write something. Although I pride myself in procrastination, I thought it time to put a few thoughts on paper. in the process of reflection I realized that there is not much that motivates me, attracts me, fascinates me or amuses me. its like I have lost meaning in life generally, not that I had much to begin with but as I keep ageing I am hit with reality. all my thoughts on how it should be have been shattered one by one. ultimately leading me to a path which has no meaning or purpose. for a sceptical person its extremely difficult to walk on a path not knowing where it may lead, not even knowing what end it encompasses. and yet here i am writing, voicing my thoughts and trivial concerns. Im sick of trying to conform to society , to family to adhere to the norms. not that there is anything wrong with following a few rules but come on, even rules are bent or broken given extraordinary circumstances.There is always an escape clause in most legal documents then why not in real life. or perhaps a reset button, like the one on a gaming console. honestly im not sure what im trying to convey here but the bottom line is. Whats the point to doing what we do day and day out, whats the purpose of following set rules and conformity. what the point of living in the illusion of being free and yet limited in every way..... to be continued have to run for now have a few things to do.